Stable Aisle is an impregnation treatment for concrete stable floors, designed for stable aisles and tie-up areas. In many stables, the bare concrete is almost always left untreated. Untreated concrete is a porous surface that releases dust with every friction. By applying Stable Aisle, you will spend less time sweeping and have a dust-free stable floor.
The product penetrates deep into the substrate and binds the dust, preventing dust particles from being drawn out of the concrete and swirling around in the air when, for example, you sweep your stable aisle. In addition to its dust-reducing properties, Stable Aisle also extends the service life of your stable floor and is somewhat stain-resistant. You will also find that the floor is easier to keep clean and that the air quality in the stable improves. Stable Aisle is made in Sweden and is both user-friendly and environmentally friendly.
Contents
Aqua, Potassium silicate, Trideceth-X, Aminomethyl propanol.
Storage
Store in a dry, cool place, tightly closed and out of reach of children.
Application
Examples of areas where Stable Aisle can be applied:
- Stable aisles, wash bays and tie-up areas
- Veterinary clinics
- Mineral substrates, such as concrete, cement and brick.
The product is easy to apply. The treatment is intended to be completed in a couple of hours, while the horses are, for example, out in the paddock. The floor must have a temperature of at least 10 °C during application.
1. Clean the substrate by sweeping, rinsing or vacuuming. Surfaces to be treated must be clean and dry during application.
2. Use a pressure sprayer to spray the product over the floor, then spread it evenly with a short-pile cleaning tool (microfibre mop or similar), or a soft broom.
3. Drying time: approximately 1–4 hours, depending on the temperature and ventilation in the stable.
Coverage: 0.1 litres/m². 5 litres is sufficient for approximately 50 m².
Stable Aisle is an impregnation treatment for concrete stable floors, designed for stable aisles and tie-up areas. In many stables, the bare concrete is almost always left untreated. Untreated concrete is a porous surface that releases dust with every friction. By applying Stable Aisle, you will spend less time sweeping and have a dust-free stable floor.
The product penetrates deep into the substrate and binds the dust, preventing dust particles from being drawn out of the concrete and swirling around in the air when, for example, you sweep your stable aisle. In addition to its dust-reducing properties, Stable Aisle also extends the service life of your stable floor and is somewhat stain-resistant. You will also find that the floor is easier to keep clean and that the air quality in the stable improves. Stable Aisle is made in Sweden and is both user-friendly and environmentally friendly.
Contents
Aqua, Potassium silicate, Trideceth-X, Aminomethyl propanol.
Storage
Store in a dry, cool place, tightly closed and out of reach of children.
Application
Examples of areas where Stable Aisle can be applied:
- Stable aisles, wash bays and tie-up areas
- Veterinary clinics
- Mineral substrates, such as concrete, cement and brick.
The product is easy to apply. The treatment is intended to be completed in a couple of hours, while the horses are, for example, out in the paddock. The floor must have a temperature of at least 10 °C during application.
1. Clean the substrate by sweeping, rinsing or vacuuming. Surfaces to be treated must be clean and dry during application.
2. Use a pressure sprayer to spray the product over the floor, then spread it evenly with a short-pile cleaning tool (microfibre mop or similar), or a soft broom.
3. Drying time: approximately 1–4 hours, depending on the temperature and ventilation in the stable.
Coverage: 0.1 litres/m². 5 litres is sufficient for approximately 50 m².
